The coating machine is not standard machine,so maybe the
information is not enough,if you are interested this machine,please
send me email inform us following details.
1 the base material
2 the width
3 unwinding and rewinding dia
4 coating material
5 how much gram of glue coated on every square of base material
6 heating method
7 coating speed
suiable for common PET/double-side tape/bopp tape/foam tape/paper
sereis/pe protective film
Turret unwinding unit(auto cutting splicing)→commascarper transfer coater&mayer bar coater→oven(drier)
→EPC(correction) →cooling→humidity system →turret rewind unit(auto cutting splicing)
(1) Single or double shaft turret type with automatic positioning flying splicers. Composed of AC vector motors and drives, the systems tension is
controlled pneumatically by low friction dancer roller.
(2) Edge position controller
Automatic edge position control with infrared sensors.
1. Single or dual shaft unwinder.
2. Automatic tension control.
3. Gravure coating or semiflexo coating.
4. Drying tunnel with sectional temperature control and recirculation
7. Steel idle rollers inside the drying hood driven by independent motor.
8. Inner stainless steel frame covers of the coating section.
9. Spreading roller driven by independent motor,positioning
10. S-type double cooling cylinders.
11. Automatic web guider for unwinding and rewinding.
12. On-line automatic detection of coating amount,with numeral
13. Drying sources:electricity,thermal oil,etc.
|heating method||Electronic heating|